Emulex LightPulse LPe11000

Emulex LightPulse LPe11000 - LPe11000-M4

Disponibilité : Livrable sous 48h
Etat : Neuf
En stock
HT : 768,75 € TTC : 922,50 €
OU 12934 Poser une question/Devis

Vue générale rapide

LightPulse LPe11000 +d'infos »
QR Code QR:  Emulex LightPulse LPe11000

Description du produit



ANSI Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-SP, FC-PLDA, FC?TAPE, FCP-2, and RFC 2625 (IP over FC)
PCI Express base spec 1.0a
PCI Express card electromechanical spec 1.0a
Fibre Channel class 2 and 3
PHP hot plug-hot swap


4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected
Integrated data buffer and code space memory

Comprehensive OS Support

Windows, Linux, NetWare, Solaris, VMware, HP?UX
Additional support is available from OEMs and partners

Hardware Environments

PowerPC®, SPARC®, x86, x64 and Intel® Itanium® 64-bit processor family


Data rates: 1.0625, 2.125 and 4.25Gb/s (auto-detected)
Optics: Short wave lasers with LC type connector

50/125?m, up to 150 meters at 4Gb/s 62.5/125?m, up to 70 meters at 4Gb/s

Physical Dimensions

Short, low profile MD2 form factor card
167.64mm x 64.42mm (6.60'' x 2.54'')
Standard bracket (low profile available)

Power & Environmental Requirements

Volts: +3.3
Operating temperature: 0° to 55°C (32° to 131°F)
Airflow required: 100 lf/m
Storage temperature: -40° to 70°C (-40° to 158°F)
Relative humidity: 5% to 95% non-condensing


Marque Emulex
Interface Fibre Channel 4Gb/s
Nombre de ports Monoport
Facteur de forme Low Profile MD2 (Demi-Hauteur Pleine Longueur)
Normes ANSI Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-PLDA, FC-SP, FC-TAPE, FCP-2, and RFC 2625 (IP over FC)