Inel 10 Gigabit AF DA Dual Port Server Adapter

Inel 10 Gigabit AF DA Dual Port Server Adapter - E10G42AFDA

Disponibilité : Livrable sous 72h
Etat : Neuf
En stock
HT : 620,00 € TTC : 744,00 €
OU 12790 Poser une question/Devis

Vue générale rapide

10 Gigabit AF DA Dual Port Server Adapter +d'infos »
QR Code QR:  Inel 10 Gigabit AF DA Dual Port Server Adapter

Description du produit



Product code E10G42AFDA
Connectors SFP+ connectors
• SFP+ direct attached cable (twinaxial) only
• Other SFP+ optics are not allowed and cannot be used with this adapter

Adapter Product Features

Intel PROSet Utility : For easy configuration and management
Intel lead-free technology
Plug and play specification support Standard
Intel® I/OAT2 including QuickData
Ships with full-height bracket installed,low-profile bracket added in package
Receive-side scaling
VMDq In a virtualized environment, packets dedicated to different virtual machines
can be routed to different queues, thus easing the routing of these packets to
the target machine
Advanced packet filtering (per port)
• 16 exact-matched packets (unicast or multicast)
• 4096-bit hash filter for multicast frames
• Promiscuous (unicast and multicast) transfer mode support
• Optional filtering of invalid frames
Direct Cache Access (DCA) The I/O device activates a pre-fetch engine in the CPU that loads the data into the CPU cache ahead of time, before use, eliminating cache misses
and reducing CPU load

Network Management

DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP
Remote Installation Services (RIS)
PXE 2.0 enabled through boot Read-Only Memory (ROM)

Network Operating Systems (NOS) Software Support

Microsoft Windows 2003 Server IA32, X64
Microsoft Vista IA32, X64, IPF
Windows Virtual Server 2005 IA32, X64, IPF
Red Hat Linux 2.6x or later IA32, X64, IPF
SUSE SLES 10 or later, Professional 9.2 or later IA32, X64, IPF
FreeBSD 5.x or later IA32, X64, IPF
ESX 3.x support (for VMware) IA32, X64, IPF
Fedora IA32, X64, IPF
EFI 1.1 IA32, X64, IPF

Advanced Software Features

Adapter Fault Tolerance (AFT)
Switch Fault Tolerance (SFT)
Adaptive Load Balancing (ALB)
Teaming support
IEEE 802.3ae
Test switch configuration Tested with major switch original equipment manufacturers (OEMs)
PCIe Hot Plug/Active Peripheral Component Interconnect (PCI)
IEEE 802.3 2005 flow control support
Tx/Rx IP, TCP, & UDP checksum 0 offloading (IPv4, IPv6) capabilities control protocol (TCP),
user datagram protocol (UDP), Internet protocol (IP)
IEEE 802.1p
TCP segmentation/large send offload
MSI-X supports Multiple Independent Queues
Interrupt moderation
IPv6 offloading Checksum and segmentation capability extended to new standard packet type

Technical Features

Data rate supported per port 10 Gigabit
Bus type PCI Express 2.0 (2.5 GT/s)
Bus width x8 lane PCI Express, operable in x4,6 x8 and x16 slots
Bus speed (x8, encoded rate) 20 Gbps uni-directional; 40 Gbps bi-directional
Interrupt levels INTA, INTB, INTC, INTD
Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor Intel 82598EB

Typical power consumption

12.2 W maximum power, 10.1 W typical power
• PCI Express +3.3 V power supply – consumes 2.3 A max, 1.7 A typical
• PCI Express +12 V power supply – consumes 0.4 A max, 0.4 A typical

Airflow 150 LFM (Linear Feet per Minute)
Operating temperature 0° C to 55° C (32° F to 131° F) with 100 LFM forced airflow (linear feet per minute)
Storage temperature -40° C to 70° C (-40° F to 158° F)
Storage humidity 90% non-condensing relative humidity at 35° C
LED Indicators LINK (solid) and ACTIVITY (blinking)

Physical Dimensions

Length 16.74 cm (6.59 in)
Width 6.89 cm (2.71 in)
Height of end bracket
PCI Express standard, 12 cm (4.725 in)
PCI Express low-profile, 7.92 cm (3.12 in)


Marque Intel